Warning: new guys keep checking signal at the tap, and that is backwards
I trained maybe 20 installers over my 12 years in the trade, and the one thing the young guys always get backwards is checking signal strength at the tap first instead of at the outlet. Last Tuesday a new hire named Marcus and I were on a job in Mesa, and he climbed the pole, took his reading, got a clean number, and told me the line was fine. But the customer was still dropping channels. The truth is the tap reading only tells you what is coming in, not what survives the run through the splitter, the wall plate, and 80 feet of coax in a 110 degree attic. You have to work backward from the TV or modem, because the loss happens inside the house, not at the pole. I learned this the hard way back in 2011 when I chased a ghost for 3 hours on a job in Tempe and it turned out to be a corroded ground block. Marcus got it after one more call, but it bugs me that the old method is not passed down anymore. How do you all teach new hires to trace a problem, at the outlet or at the tap?
80 feet of coax in a 110 degree attic is insane, I don't know how you guys work in that heat without passing out up there. But your point is dead on, checking at the tap tells you nothing about what the signal looks like after it gets beat up inside the house. Makes way more sense to start at the outlet and walk it back toward the pole until the numbers go bad.